Canon MP495 Driver, Software, Setup for Windows and Mac

Canon MP495 Driver, Software, Setup for Windows and Mac – The Canon PIXMA MP495 is a budget inkjet multifunction printer that consists of flash memory card slots and integrated 802.11 n Wi-Fi networking. It’s simple to set up and also run with or without a computer system. Print quality is good yet not magnificent for the rate you pay, and inks are costly if you buy them at Canon’s advised retail price.

Canon MP495 Driver, Software, Setup for Windows and Mac

Canon MP495 Review

The MP495’s quoted print rates are refreshingly underrated as well as a result far more precise than we ‘d discovered to anticipate in this area. Throughout our examinations it outputted a 10-page file at a price of 6.6 ppm – not far behind the 8.8 ppm priced estimate, as well as this increased to 8ppm when switched over to compose setting. Standard top quality is exceptionally excellent and also though comparison is significantly lowered when selecting draft setting, it’s would certainly still be flawlessly acceptable for many objectives.

Canon MP495 Features

Canon also asserts that its new design is a little bit of a whiz with images, though regretfully there’s no PictBridge USB link or card viewers to accept straight prints from tools. Outputting a full-sized A4 print at the finest quality settings took simply over 3 mins, but regretfully the resultant high quality was below our assumptions. Images were overly dark as well as a result shed a significant quantity of vibrancy compared to the original, along with displaying a rather fuzzy hue and also absence of intensity that certainly wouldn’t make this device ideal for “photo high quality” result.

See also: Canon MG2520 Driver, Software, Setup for Windows and Mac

Canon MP495 Performance

The Canon PIXMA MP495 has an optimum 4800x1200dpi print resolution, which puts it on the same level with Canon’s other budget plan PIXMA models. It’s ranked at 5 colour A4 web pages per min, or 8.8 pages per min if you’re printing white and black. We handled 4.2 colour A4 pages and 8.6 monochrome A4 pages per min in our testing, which is reasonably near to Canon’s estimated figures. Printing a 6x4in picture takes just under a min (52sec).

Paper print top quality is affordable in Standard as well as High high quality modes. If you’re printing off institution projects, traveling directions or other records where print quality isn’t important, the Canon PIXMA MP495 does a fine task. If you’re printing images, we ‘d definitely opt for the High quality setup– and also then you can still notice a lack of fine photo detail in A4 prints and some posterisation in colour gradients.

Canon MP495 Driver Download for Windows

This driver package installer contains the following items:

  • Printer Driver
  • Scanner Driver and Scan Utility
  • Software Updater
Supported OS: Windows 11, Windows 10, Windows 8, and Windows 7
Name: MX920 series MP Drivers Ver.1.01
Size: 38.54MB

Name: MX920 series XPS Printer Driver Ver. 5.65
Size: 15.46MB

How to Install Canon MX920?

  1. Visit the printer’s official website, or click the link directly below this post.
  2. Then select the Operating System (OS) by use or need.
  3. Then select the driver to be downloaded.
  4. Once downloaded, open the location of the driver file and then extract it (if necessary).
  5. Connect the printer’s USB cable to your device (computer or laptop) and make sure it is fully connected.
  6. Open the driver file and start running.
  7. Follow the instructions to complete.
  8. After everything is complete, make sure to restart (if necessary).
  9. Finish.

Leave a Reply

Your email address will not be published. Required fields are marked *